Installing Memory Add-On License - Cisco CSR 1000v Series Software Configuration Manual

Installing Cisco CSR 1000v Licenses
Restrictions apply when installing memory add-on licenses with a broadband feature license. For more
Note
information, see
Broadband Feature License, on page
Table 30: Cisco CSR 1000v Memory Allocation with Memory Add-on Licenses
VM Memory
2.5 GB (Additional
memory or
broadband license
installation is not
available for this
level of VM
memory.)
4 GB (Additional
memory or
broadband license
installation is not
available for this
level of VM
memory.)
6 GB
8 GB
12 GB
16 GB

Installing Memory Add-on License

Beginning with Cisco IOS XE 3.13S, you can add memory in 4 GB increments to enable control plane scaling
using the memory add-on license (L-CSR-MEM-4G=). The following prerequisites apply:
Installing CSL Feature Add-on Licenses for Cisco IOS XE 3.13S and Later
Information About Installing Broadband Feature License, on page 166
167.
Default Memory One 4GB license or
Allocation One BB license
IOSd = 1 NA
GBDataplane = 1.5
GB
IOSd = 2.5 NA
GBDataplane = 1.5
GB
IOSd = 2.5 IOSd = 4.5G
GBDataplane = 1.5
Dataplane = 1.5G
GB
IOSd = 2.5 IOSd = 5.5G
GBDataplane = 1.5
Dataplane = 2.5G
GB
IOSd = 2.5 IOSd = 5.5G
GBDataplane = 1.5
Dataplane = 2.5G
GB
IOSd = 2.5 IOSd = 5.5G
GBDataplane = 1.5
Dataplane = 2.5G
GB
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
and Installing
Two 4GB licenses Three 4 GB licenses
or One BB License or One BB license +
+ One 4GB license Two 4 GB licenses
NA NA
NA NA
NA NA
NA NA
IOSd = 9.5G NA
Dataplane = 2.5G
IOSd = 9.5G IOSd = 13.5G
Dataplane = 2.5G Dataplane = 2.5G
163