Creating A Bootstrap Day0 Configuration For Virt-Manager; Creating The Cisco Csr 1000V Vm Using Virt-Install-Using .Qcow2 Image - Cisco CSR 1000v Series Software Configuration Manual

Installing the Cisco CSR 1000v in KVM Environments

Creating a Bootstrap Day0 Configuration for virt-manager

This procedure provides additional steps to be executed within
virt-manager—Using .qcow2 or .iso Image, on page
The following steps are performed on the KVM server.
SUMMARY STEPS
1. Create iosxe_config.txt or ovf-env.xml file. (For details, see
2. Create a disk image from this file using below command:
3. (This step must be performed within
.qcow2 or .iso Image, on page
DETAILED STEPS
Step 1
Create iosxe_config.txt or ovf-env.xml file. (For details, see
Step 2 Create a disk image from this file using below command:
Example:
mkisofs -l -o /my/path/csr_config.iso <configuration_filename>
Step 3
(This step must be performed within
Image, on page
Mount the csr_config.iso as an additional disk during creation of the CSR virtual machine.
Creating the Cisco CSR 1000v VM Using virt-install—Using .qcow2 Image
The following steps are performed on the KVM server.
Prerequisites
• Download and install the virt-install RPM package on the KVM server.
• Download the .qcow2 image from the Cisco CSR 1000v software installation image package and copy
SUMMARY STEPS
1. Using the virt-install command, create the instance and boot, using the following syntax:
DETAILED STEPS
Using the virt-install command, create the instance and boot, using the following syntax:
Creating the Cisco CSR 1000v VM Using virt-manager—Using .qcow2 or .iso
116.)
it onto a local or network device.
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
Creating a Bootstrap Day0 Configuration for virt-manager
116.
Creating the Cisco CSR 1000v VM Using virt-manager—Using
116.)
Bootstrap Properties, on page
Creating the Cisco CSR 1000v VM Using
Bootstrap Properties, on page
126.)
126.)
119