CHAPTER 13
Installing the Mounting Hardware
Installing the MX5, MX10, MX40, and MX80 Cable Management Bracket
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Installing the MX5, MX10, MX40, and MX80 Cable Management Bracket on page 79
Moving the Mounting Brackets for Center-Mounting MX5, MX10, MX40, and MX80
Routers on page 80
The cable management bracket attaches to the left side of the router. To install the cable
management bracket (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Position the cable management bracket on the left side of the front of the chassis.
2.
Tighten the screws at the bottom and top of the bracket.
3.
Figure 30: Installing the Cable Management Bracket
MX5, MX10, MX40, and MX80 Site Preparation Checklist on page 44
MX5, MX10, MX40, and MX80 Installation Summary on page 50
Figure 30 on page
79):
79