CHAPTER 10
Transceiver and Cable Specifications
Determining Transceiver Support for MX5, MX10, MX40, and MX80 3D Universal Edge
Routers
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Determining Transceiver Support for MX5, MX10, MX40, and MX80 3D Universal Edge
Routers on page 65
Understanding Fiber-Optic Cable Signal Loss, Attenuation, and Dispersion on page 66
Calculating Power Budget and Power Margin for Fiber-Optic Cables on page 67
Routing Engine Interface Cable Specifications for MX5, MX10, MX40, and MX80
Routers on page 69
You can find information about the optical transceivers supported on your Juniper device
by using the Hardware Compatibility Tool. In addition to transceiver and connection type,
the optical and cable characteristics–where applicable–are documented for each
transceiver. The Hardware Compatibility Tool enables you to search by product, displaying
all the transceivers supported on that device, or category, by interface speed or type. The
list of supported transceivers for the MX5, MX10, MX40, and MX80 3D Universal Edge
Routers is located at
https://pathfinder.juniper.net/hct/category/
CAUTION:
If you face a problem running a Juniper Networks device that uses
a third-party optic or cable, the Juniper Networks Technical Assistance Center
(JTAC) can help you diagnose the source of the problem. Your JTAC engineer
might recommend that you check the third-party optic or cable and potentially
replace it with an equivalent Juniper Networks optic or cable that is qualified
for the device.
MX5, MX10, MX40, and MX80 Modular Interface Card Description on page 23
.
65