Table of Contents
Advertisement
■ Unlocking the needle bar
a
Display the embroidering screen, and then
touch the key for any needle bar other than
the one that is locked.
The needle bar is unlocked and will return to
original position.
Adjusting the angle
Depending on the type of fabric being
embroidered, it may not be possible to stretch the
fabric in the embroidery frame at the desired
angle. In this case, adjust the angle of the pattern
so that it is correctly positioned on the fabric.
a
Touch
.
The following screen appears.
OTHER BASIC PROCEDURES
Example: Original angle
Rotates 90 degrees to the right
Rotates 10 degrees to the right
Rotates 1 degree to the right
Rotates 0.1 degree to the right
Rotates 90 degrees to the left
Rotates 10 degrees to the left
Rotates 1 degree to the left
Rotates 0.1 degree to the left
Moves the pattern in the direction of the arrow on
the key.
Moves the frame by 0.1 mm.
Moves the frame by 0.5 mm.
Moves at maximum speed when a key is held
down.
Touch this key to return the pattern to its original
angle.
Touch this key to close this screen.
3
91
Advertisement
Table of Contents
Troubleshooting
