Brother 884-T20 Operation Manual page 53

• Use spool cap on all spools of thread shorter than the
height of the spool pin.
1 Spool mat
2 Small spool
3 Spool cap
• When using a flanged thread spool, place the spool
on the spool pin, and then place the included spool
cap onto the spool pin, over the spool.
The numbers indicate the thread path for each of
the numbered needle bars. Be very careful to
correctly thread the needle bars.
b Pass the thread through the number 1 hole
in the thread guide just above the spool,
and then pass the thread through the
number 1 hole in the thread guide toward
the front of the machine.
1 Number 1 hole in the thread guide above the spool
2 Number 1 hole in the thread guide toward the front
of the machine
EMBROIDERING TUTORIAL
c Pass the thread through the hole in the
number 1 upper thread guide and pull the
thread toward you.
1 Hole in upper thread guide
d Hold the thread with both hands, and then
pass it under the guide plate from the right.
1 Upper thread guide plate
2
51