Download  Print this page

Changing The Screen Saver Settings - Brother 884-T20 Operation Manual

Hide thumbs

Advertisement

Changing the screen saver
settings
■ Specifying the length of time until
the screen saver is displayed
The screen saver is displayed when no machine
operation is performed for the specified length of
time.
A setting between "OFF" (0) and "60" minutes can
be set in 1-minute increments.
When the embroidery machine is purchased, "5
min" is selected.
The screen saver settings can be specified from page
4 of the settings screen.
a
Touch
and
setting.
■ Changing the screen saver image
You can select your own personal images for the
screen saver of your machine.
Before changing the screen saver image, prepare the
image on your computer or USB media.
When the embroidery machine is purchased, the
default setting is selected.
The screen saver settings can be specified from page
4 of the settings screen.
Compatible image files
Format
JPEG format (.jpg)
File size
Max. 2 MB for each image
800 × 1280 pixels or less, (If the width is
more than 800 pixels, the image
File dimension
imported will be reduced to a width of
800 pixels.)
Number allowed
5 or less
Note
• When using USB media, make sure that it
contains only your own personal images to
be selected for the screen saver.
• Images saved on an SD card cannot be
selected for the screen saver. Use images
from the computer or USB media.
• Folders are recognized. Open the folder that
holds your personal images.
186
to select the desired
a
Touch
.
b
Touch
.
c
Connect the USB media or the computer
(using a USB cable) that contains your
personal image to the USB port of the
machine.
• Refer to page 74 about USB connectivity.
d
Touch
to select the first image.
• The images will appear in a list in this screen. Select
the desired number to specify the image.

Advertisement

Table of Contents

   Also See for Brother 884-T20

   Related Manuals for Brother 884-T20

Comments to this Manuals

Symbols: 0
Latest comments: