Basic Procedures - Brother 884-T20 Operation Manual

Basic Procedures

Basic embroidering procedures are described below.
Check the overall procedure below, before operating the embroidery machine.
Step
1 Install the bobbin.
2 Turn on the machine.
3 Select an embroidery pattern.
4 Edit the embroidery pattern.
5 Check the previewed image.
6 Hoop the fabric in the embroidery frame.
7 Attach the embroidery frame to the machine.
8 Specify the embroidering settings.
9 Check the embroidery area.
10 Thread the upper threads.
Unlock the machine, then press the start/stop button to start
11 embroidering.
(Once embroidering is completed, the machine automatically stops.)
Remove the embroidery frame, and then remove the fabric from the
12
frame.
13 Turn off the machine.
The operations to embroider the pattern are described on the following pages.
Although embroidering can continue without the pattern being edited or embroidering settings being
specified, refer to page 146 for details on editing the patterns, and refer to page 105 for details on
specifying embroidering settings.
Descriptions of the keys and other information that appear in the main LCD screens are provided in the
tables on pages 63 to 72. Use these tables for quick reference.
The various operating precautions that must be observed during the basic procedures are provided on
pages 29 to 31. These precautions must be strictly observed in order for the machine to function properly.
Make sure to read these precautions.
32
Operation
Operating
Tutorial
Precaution
Reference Page
Reference Page
p. 33 p.30
p. 35 p.29
p. 38
p. 40
p. 41
p. 42 p.31
p. 44
p. 46
p. 47
p. 48 p.31
p. 57
p. 60
p. 61