Brother 884-T20 Operation Manual page 57

Note
• If the thread is not correctly passed through
the groove in the thread cutter, the
message "Wiper error" appears and the
needle cannot be threaded. Be sure to
securely pass the thread through the
groove.
• If enough thread is not pulled out, the
thread cannot be pulled through the thread
cutter.
e Press the automatic needle-threading
button.
• The threader moves back away from the needle. The
thread is pulled through the needle eye.
• The wiper comes out and catches the thread between
the needle and the threader.
• The threader goes back to the original home position.
This completes the upper threading for needle bar 1.
Thread the remaining needle bars in the same way.
Note
• If the needle bar to be threaded is not
moved to the embroidering position, the
needle cannot be threaded with the
automatic needle-threading mechanism.
For the remaining needle bars, perform the
following operation to move the needle bar
to the embroidering position before trying to
thread the needle.
EMBROIDERING TUTORIAL
■ Moving and threading a selected
needle bar
You can move and thread a selected needle bar to
the embroidering position at any time.
a Touch .
 The needle bar move screen appears.
b Touch the key for the needle bar that you
wish to move or thread.
 The selected needle bar moves to the position of
embroidery.
2
55