Brother 884-T20 Operation Manual page 89

■ Embroidering small pieces of fabric
When embroidering pieces of fabric that are smaller
than the embroidery frame, use spray fabric
adhesive to attach the fabric to stabilizer (backing)
hooped in the embroidery frame. With fabrics where
you do not wish to use spray adhesive, baste the
fabric to the stabilizer (backing).
1 Fabric
2 Stabilizer (backing)
■ Embroidering the corner of fabric
When embroidering the corner of a piece of fabric,
use spray fabric adhesive to attach the corner of the
fabric to stabilizer (backing), and then hoop the
stabilizer (backing) in the embroidery frame. With
fabrics where you do not wish to use spray adhesive,
baste the fabric to the stabilizer (backing).
1 Fabric
2 Stabilizer (backing)
OTHER BASIC PROCEDURES
■ Embroidering narrow pieces of
fabric, such as ribbon
When embroidering narrow pieces of fabric, use
spray fabric adhesive to attach the fabric to stabilizer
(backing), and then hoop the stabilizer (backing) in
the embroidery frame. With fabrics where you do
not wish to use spray adhesive, clamp both ends of
the fabric, together with the stabilizer (backing), in
the embroidery frame.
1 Ribbon
2 Stabilizer (backing)
3
87