Selecting A Character - Brother 884-T20 Operation Manual

■ Changing the pattern size
After selecting the first character, touch
the character is the desired size.
• The next character that is selected will have the new
character size.
• The character size of all entered characters cannot be
changed after the characters are combined. (The size
of the entire pattern can be changed from the pattern
editing screen.)

■ Selecting a character

A character can be selected in either the text
preview area or the pattern display area.
1
2
1 Directly select a character.
2 Touch
and
a character.
e Touch .
This confirms the character selection.
 The pattern editing screen appears.
Next, we will combine the letters with a frame.
f Touch .
 The pattern type selection screen appears.
until
to move the cursor and select
SELECTING/EDITING/SAVING PATTERNS
g Touch .
 The design selection screen appears.
h Touch .
 The list of frame patterns appears.
i Select a pattern.
Touch the desired pattern.
 The selected frame pattern appears in the pattern
display area.
• If the wrong pattern was selected or you wish to select
a different pattern, touch the desired frame pattern.
5
129