Upgrade Procedure Using Computer - Brother 884-T20 Operation Manual

c Insert the USB media into the USB port on
the machine. The media device should only
contain the upgrade file.
1 USB ports
2 USB media
Note
• The access lamp will begin blinking after
inserting USB media, and it will take about 5
to 6 seconds to recognize the media. (Time
will differ depending on the USB media).
d Touch .
 The upgrade file is downloaded.
Note
• If an error occurs, a red text error message
will appear. When the download is
performed successfully, following message
will appear.
e Remove the USB media, and turn the
machine off and on again.
232
Upgrade procedure using
computer
Note
• Do not connect any additional USB media
devices to your computer when using the
USB cable.
For computers and operating systems, see
"Connecting your machine to the PC" on
page 123.
a While pressing the automatic threading
button, turn the main power to on.
 The following screen will appear on the LCD.
b Touch .
c Plug the USB cable connector into the
corresponding USB ports for the computer
and for the machine.
 "Removable Disk" will appear in "Computer (My
computer)".
d Copy the upgrade file to "Removable Disk".