Digital Inputs Em-Sxind - BONFIGLIOLI Vectron Manual

6.3
The EM-RES-03 expansion module has three digital inputs. The assignment of the
control signals to the available software functions can be adapted to the application in
question. As a function of the selected
and the selection of the operation mode differ. In addition to the digital control inputs
available, further internal logistic signals are also available as sources.
The individual software functions are assigned to the various signal sources via
parameterization-capable inputs. This enables a flexible and varied use of the digital
control signals.
320 - EM-S1IND
321 - EM-S2IND
322 - EM-S3IND
520 - EM-S1IND inverted
521 - EM-S2IND inverted
522 - EM-S3IND inverted
Alongside the operation modes listed, those stated in the operating instructions of the
frequency inverter in the chapter "Digital inputs" also apply.
10/07
10/07

Digital inputs EM-SxIND

Operation mode
EM-RES-03
Configuration
Function
Signal on digital input 1 (X410B.2)
Signal on digital input 2 (X410B.3)
Signal on digital input 3 (X410B.4)
Inverted signal on digital input 1 (X410B.2)
Inverted signal on digital input 2 (X410B.3)
Inverted signal on digital input 3 (X410B.4)
EM-RES-03
30, the factory-set assignment
61
61