Fuji Xerox C2265 Manual page 8

・
As the TOE uses the Hard Disk Data Overwrite and Hard Disk Data Encryption functions, a
model to be used as the TOE shall be equipped with the internal HDD. Therefore, when the
model to be used is not equipped with the internal HDD, the internal HDD shall be
purchased and installed.
・
When a model to be used as the TOE does not have the Data Security function, the Data
Security Kit shall be purchased and installed. (The target products intended for Japan do
not have the Data Security function.)
・
As the TOE uses the following functions: fax, the Internet fax send, scan, and network scan,
when a model to be used as the TOE does not have one or more of the said functions, the
Fax Kit and/or Scan Kit shall be purchased and installed.
・
To use print function, the printer driver shall be installed to the external client for general
user and that for system administrator.
・
There are two types of user authentication, local authentication and remote
authentication, and the TOE behaves with either one of the authentication types
depending on the setting.
In this ST, the difference of the TOE behavior is described if the TOE behaves differently
depending on the type of authentication being used. Unless specified, the behavior of the
TOE is the same for both authentication types.
There are two types of remote authentication, LDAP authentication and Kerberos
authentication. To set SA (system administrator privilege) as user role assumption in
Kerberos authentication, LDAP server is also necessary.
Note:
・
For Japanese model does not have Remote Authentication function and S/MIME function.
Each function of Remote Authentication, S/MIME, E-mail, and Internet Fax Send that are
written in the following sections is subject to evaluation of for overseas model only.
・
The TOE's optional functions to print from USB and store to USB are not included in the
target of evaluation.
Therefore, the [Store to USB] and [Media Print] buttons do not appear on the control panel.
1.3.1.3. Usage and Major Security Features of TOE
The TOE is mainly used to perform the following functions:
・
Copy function and Control Panel function are to read the original data from IIT and print
them out from IOT according to the general user's instruction from the control panel.
When more than one copy of original data are ordered, the data read from IIT are first
stored into the MFD internal HDD. Then, the stored data are read out from the internal
HDD for the required number of times so that the required number of copies can be made.
・
Print function is to decompose and print out the print data transmitted by a general user
client.
・
CWIS (CentreWare Internet Services) is to retrieve the document data scanned by MFD
from Mailbox.
Fuji Xerox C2265/C2263
- 3 -
Security Target

Copyright 2016 by Fuji Xerox Co., Ltd