Self Test (Tsf_S_Test) - Fuji Xerox C2265 Manual

Ethernet
Control Panel
7.1.9.

Self Test (TSF_S_TEST)

TOE can execute a self test function to verify the integrity of TSF executable code and TSF data.
(1) FPT_TST.1 TSF testing
TOE verifies the area of NVRAM and SEEPROM including TSF data upon initiation, and
displays an error on the control panel if an error occurs.
However, an error is not detected for the data on audit logs and time and date as these are
not included in the target. Also, at the time of booting the TOE, the TOE calculates the
checksum of Controller ROM and Fax ROM to confirm if it matches the specified value, and
displays an error on the control panel if an error occurs.
Fuji Xerox C2265/C2263
data are not transmitted between public telephone line
and internal network. Thus, the public telephone line data
received by the public telephone line is not transmitted to
the internal network.
Unpermitted to transfer the data to other interfaces upon
receiving the print data.
Unpermitted to receive other user data from the user client
or server, and no data are transferred.
(Note: The print job is stored in Private Print)
When the identification and authentication data are
received from user client and the user authentication
function is set to remote authentication, TOE sends the
identification and authentication data to LDAP server or
Kerberos server.
Identification and authentication are required to use
functions from the control panel.
In addition, there is no function to transfer the data input
from the control panel to other interfaces without any
instruction.
When the user authentication function is set to remote
authentication, TOE sends the identification and
authentication data to LDAP server or Kerberos server.
- 125 -
Security Target

Copyright 2016 by Fuji Xerox Co., Ltd