Table of Contents
Advertisement
Fuji Xerox C2265/C2263
authenticated from the control panel for print job.)
b)
Functions controlled by CWIS
Display of device condition, display of job status and its log, function to retrieve document
data from Mailbox, and print function by file designation
c)
Functions using printer driver of user client
The data of user client is decomposed to the print data described in PDL readable by the
MFD, and the print data are stored in TOE (Private Print Function).
When a user sends a print request from the printer driver in which the Accounting System is
preset, the MFD decomposes the received data into bitmap data and stores the data in the
internal HDD as private print according to the user ID.
In addition, access to and setting change of the TOE security functions are restricted to the
authorized system administrator. A system administrator needs to enter his/her ID and
password from MFD control panel or system administrator client.
(1) FIA_AFL.1(a) Authentication failure handling
The function of the TOE to handle the authentication failures is provided for the system
administrator authentication which is performed before accessing the system administrator
mode. When the number of unsuccessful authentication attempts with key operator ID
reaches 5 times, the control panel does not accept any operation except power cycle, and
the web browser does not accept authentication operation until the MFD main unit is
powered off/on.
(2) FIA_AFL.1(b) Authentication failure handling
The function of the TOE to handle the authentication failures is provided for the SA
authentication upon local authentication which is performed before accessing the system
administrator mode. When the number of unsuccessful authentication attempts with system
administrator ID reaches 5 times, the control panel does not accept any operation except
power cycle, and the web browser do not accept authentication operation until the MFD
main unit is powered off/on.
(3) FIA_ATD.1 User attribute definition
The function of the TOE to define and retain the roles of key operator, SA, and general user.
(4) FIA_SOS.1 Verification of secrets
When setting a password of SA and general user, the TOE rejects settings if the password is
less than the minimum number of characters.
(5) FIA_UAU.1 Timing of authentication
FIA_UID.1 Timing of identification
The TOE requests a user to enter his/her ID and password before permitting him/her to
operate the MFD function via Web browser of a user client, or the control panel. The entered
Security Target
- 112 -
Copyright
2016 by Fuji Xerox Co., Ltd
Advertisement
Table of Contents
