Guidance - Fuji Xerox C2265 Manual

The controller board is connected to the control panel via the internal interfaces which transmit
control data, to the IIT board and IOT board via the internal interfaces which transmit
document data and control data.
The controller board is a PWB which controls MFD functions of copy, print, scan, and fax. The
board has a network interface (Ethernet) and local interfaces (USB) and is connected to the IIT
board and IOT board. The program is installed in Controller ROM.
FAX board is the interface between a public telephone line and the controller board and is
connected to the controller board via USB.
The program is installed in FAXROM inside the FAX board.
The IOT (Image Output Terminal) is a device to output image data which was sent from the
controller board.
The IIT (Image Input Terminal) is a device to scan an original and send its data to the
controller board for copy, scan, and Fax functions.
The ADF (Auto Document Feeder) is a device to automatically transfer original documents to
IIT.
The control panel is a panel on which buttons, lamps, and a touch screen panel are mounted to
use and configure MFD functions of copy, print, scan, and fax.
NVRAM (Including SD Memory) and the internal HDD in TOE are not the removable memory
media.
4 types of Channel correspond to the following in TOE.
 Private Medium Interface
Control panel, USB
 Shared Medium Interface
Ethernet
 Original Document Handler
IIT
 HardCopy Output Handler
IOT
1.4.4.

Guidance

The following are the guidance documents for this TOE.
(1) For Japan
 DocuCentre-V C2263 Administrator Guide: ME7472J1-1
(SHA1 hash value: 0aeb4a0cc3607d03fd387ce23ce6bc00e96da02e)
 DocuCentre-V C2263 User Guide:ME7471J1-1
(SHA1 hash value: 51c82a75e9bd48a66590832d7e7a42739b561ac6)
 DocuCentre-V C2263 Security Function Supplementary Guide: ME7594J1-2
(SHA1 hash value: 60ad9a6573e1ab10b52d8a5635f29661c9980647)
Fuji Xerox C2265/C2263
- 18 -
Security Target

Copyright 2016 by Fuji Xerox Co., Ltd