Table of Contents
Advertisement
8.2.
Terminology
The following terms are used in this ST:
Term
Scan / Network
Scan
Mailbox
Store Print
CentreWare
Internet Services
(CWIS)
User
Authentication
Local
Authentication
Remote
Authentication
Hard Disk Data
Overwrite
Decompose
Function
Decompose
System
administrator
mode
Auto Clear
Fuji Xerox C2265/C2263
Definition
A service to enable the instruction of directly transferring the data from
the control panel of the TOE to Mailbox in the TOE, and via network
(FTP/SMTP protocol) to PC's shared folder, FTP server, and mail server.
Also, it enables to designate the conversion to PDF, TIFF, and JPEG, etc.
A location to store the scanned document and the fax document
instructed by computer in the TOE.
It also enables to send the document stored in Mailbox and retrieve the
document from computers on the network.
A function to store the confidential output data temporarily in the TOE
and start its output after identification and authentication. When this
function is set to [enabled], normal printing is disabled. It enables a
highly-confidential document output without being mixed with other
documents.
CWIS is a service on a Web server in the TOE to confirm the status of the
TOE, change settings of the TOE, and request retrieval and printing of
documents toward the TOE via the Web browser of the user client.
CWIS can be used with the Windows standard Web browser.
A function to limit the accessible TOE functions by identifying the user
before he/she uses each TOE function.
There are two modes, Local Authentication and Remote Authentication,
and TOE operates with either one of these authentication modes.
A mode to manage user authentication of the TOE using the user
information registered in the MFD
A mode to manage user authentication of the TOE using the user
information registered in the remote authentication server.
To write over the area of the document data stored in the internal HDD
when deleting the data.
A function to analyze and convert the print data written in PDL into
bitmap data.
To analyze and convert the data written in PDL into bitmap data by
decompose function.
An operation mode that enables a system administrator to refer to and
rewrite TOE setting for device operation and that for security functions
according to the operational environment. This mode is distinguished
from the operation mode that enables a general user to use the MFD
functions.
A function to automatically logout authentication after a specified
- 127 -
Security Target
Copyright
2016 by Fuji Xerox Co., Ltd
Advertisement
Table of Contents
