Ftp Access Via Internet Explorer; Ftp Access Via Datamanager; File Transfer Program - ABB Navigator 600 Silica User Manual

Navigator 600 Silica
Single-stream
E.11 FTP Access via Internet Explorer
Note. FTP access requires Internet Explorer version 5.5 or
later.
Before data can be accessed via FTP, Internet Explorer must be
configured with the appropriate options.
To ensure that the latest data file is copied, Internet Explorer
must be set to check for newer versions of stored pages on
every visit to a page. Internet Explorer must also be set to
enable FTP access.
To configure Internet Explorer:
1. From the Internet Explorer 'Tools' menu select 'Internet
Options'.
2. In the 'General' tab of the displayed dialog box, click the
'Settings' button in the 'Temporary Internet Files'
grouping.
3. From the options for 'Check for newer versions of stored
pages:', select 'Every visit to the page' and click 'OK'.
4. Select the 'Advanced' tab of the 'Internet Options' dialog
box, ensure that the 'Enable folder view for FTP sites
option' under the 'Browsing' heading is selected and click
'OK'.
To access data stored on the analyzer via Internet Explorer:
1. Start Internet Explorer.
2. In the 'Address' bar, enter 'ftp://' followed by the IP
address of the analyzer from which the files are to be
copied. A log-in dialog box is displayed:
IM/NAV6S/SS–EN Rev. E
3. Type the 'User name' and 'Password' and press enter.
The folders that are present on the analyzer are displayed.
4. Open the folder containing the file to be displayed. The
files within the folder can be displayed in any standard
Explorer view (small icon, large icon, list or details) by
selecting the appropriate option from the 'Views' menu.
Note. The SDMMC folder is visible only if an SD card
is present and logging is set to 'On-line' – see
Section 9, page 53.
5. Files / Folders can be copied to / from the analyzer.
Note. An audit log entry is created and displayed for
each FTP logon giving details of the logon user name
and access (full or read-only). When Internet Explorer
is used as the FTP client, two log-ons are performed
at the start of each session resulting in two log entries.
E.12 FTP Access via DataManager
DataManager can be used with FTP to access data files that
have been saved to the archive media (SD card) inserted in the
analyzer. For DataManager configuration details for FTP access,
refer to the DataManager User Guide, IM/DATMGR.
E.13 File Transfer Program
A File Transfer Scheduler Program (FTSP) is available that
enables archive and configuration files to be transferred
automatically to a PC using FTP. The transferred files can be
stored either on the local drive of the PC or on a network drive
for easy access and secure back-up.
To download the FTSP program (FTS.exe), enter the following
(without spaces) in your web browser's Address bar:
http://search.abb.com/library/ABBLibrary.asp?DocumentID=FT
S.exe&LanguageCode=en&DocumentPartId=&Action=Launch
To download the FTSP User Guide (IM/SMFTS), enter the
following (without spaces) in a web browser's address bar:
http://search.abb.com/library/ABBLibrary.asp?DocumentID=IM/
SMFTS&LanguageCode=en&DocumentPartId=&Action=Launc
h
Appendix E – Web Server
83