ABB Navigator 600 Silica User Manual page 27

Navigator 600 Silica
Single-stream
Configuration Level
Unprotected
See Note 2
Fig. 5.2 System Configuration
Note.
1. If 'New Configuration' or 'Open Configuration' is selected and the modified configuration file is saved, new data files
for all log files are created and any unarchived data is lost.
2. Existing security configuration parameters are retained when a configuration is opened from file or when a new
configuration is loaded (the security remains as currently configured). Check 'Load security configuration from file' to
overwrite the current configuration with data from the file to be loaded.
The option to load or retain the security configuration applies only to Advanced Security mode and is available only to
the System Administrator (User 1). If a new or existing configuration file is opened by a user other than the System
Administrator, existing security settings are retained.
IM/NAV6S/SS–EN Rev. E
system' parameter is set to
Configuration Level
Protected
Edit the current configuration. Changes are not
implemented until saved on exit from Configuration
Cancel and return
to 'Operator' level
Open a new configuration
with the default settings –
see Note 1
Displayed only if 'Security
Displayed only if 'Security
'Basic' – see on-line help
system' parameter is set to
system
'Advanced' – see on-line
Open a configuration saved previously to
internal or external storage (up to 16 configurations
can be stored in internal memory) – see Note 1
Cancel
Toggle between internal /
external storage
5 Configuration
Invalid Password
Entered
help system
Valid Password
Entered
Accept
selection
25