Time - ABB Navigator 600 Silica User Manual

Navigator 600 Silica
Single-stream

5.3.3 Time

Fields
Date and Time
Daylight Saving – Enable
Daylight Saving – Start
Daylight Saving – End
IM/NAV6S/SS–EN Rev. E
Description
Warning. Changing the time can result in the permanent loss of data. Once it is changed a warning
is displayed stating that recording is disabled until the configuration has been saved.
Enables automatic daylight saving time adjustment. Options are:

Off. The 'Daylight Saving – Start' and 'Daylight Saving – End' fields are not available.

Auto – USA. The start and end of the daylight saving period in the USA is calculated
automatically. The clock is incremented automatically by 1 hour at 2:00 am on the second
Sunday in March and decremented automatically by 1 hour at 2:00 am on the first Sunday in
November.

Auto – Europe. The start and end of the daylight saving period in Central Europe is calculated
automatically. The clock is incremented automatically by 1 hour at 2:00 am on the last Sunday
in March and decremented automatically by 1 hour at 2:00 am on the last Sunday in October.

Auto – Custom. The start and end date and time can be edited.
If 'Daylight Saving – Enable' is set to USA or Europe, the start date is displayed but cannot be edited.
If 'Daylight Saving – Enable' is set to 'Custom' the date and time can be edited.
If 'Daylight Saving – Enable' is set to USA or Europe, the end date is displayed but cannot be edited.
If 'Daylight Saving – Enable' is set to 'Custom' the date and time can be edited.
5 Configuration
27