Safety Conventions; Safety Recommendations; Service And Repairs; Potential Safety Hazards - ABB Navigator 600 Silica User Manual

Navigator 600 Silica
Single-stream

1.9 Safety Conventions

Warning. In this manual, a warning is used to indicate a condition that, if not met, could cause serious personal injury and / or
death. Do not move beyond a warning until all conditions have been met.
If a warning sign appears on the instrument itself, refer to Precautionary Labels – UL Certification and Electrical Safety – CEI/IEC
61010-1:2001-2 for an explanation.
Caution. A caution is used to indicate a condition that, if not met, could cause minor or moderate personal injury and / or
damage to the equipment. Do not move beyond a caution until all conditions have been met.
Note. A note is used to indicate important information or instructions that must be considered before operating the equipment.

1.10 Safety Recommendations

For safe operation, it is imperative that these service instructions be read before use and that the safety recommendations mentioned
herein be scrupulously respected. If danger warnings are not heeded to, serious material or bodily injury could occur.
Warning. The installation of the instrument must be performed exclusively by personnel specialized and authorized to work on
electrical installations, and in accordance with relevant local regulations.

1.11 Service and Repairs

Other than the serviceable items listed in Appendix H, page 86, none of the instrument's components can be serviced by the user.
Only ABB personnel or ABB-approved representatives are authorized to attempt repairs to the system and only ABB-approved
components must be used. Any attempt at repairing the instrument in contravention of these principles could cause damage to the
instrument and injury to the person carrying out the repair. It renders the warranty null and void and could compromise the correct
working of the instrument and the electrical integrity or the CE compliance of the instrument.
If you have any problems with installation, starting, or using the instrument please contact the company that sold it to you. If this is not
possible, or if the results of this approach are not satisfactory, please contact the manufacturer's Customer Service.

1.12 Potential Safety Hazards

The following potential safety hazards are associated with operating the analyzer:

Electrical (line voltage)

Potentially hazardous chemicals
6
1 Safety
IM/NAV6S/SS–EN Rev. E