Using Ftp To Access The Mib Files - Cisco Catalyst 2928 Software Configuration Manual

Appendix A Supported MIBs
•
•
•
•
•
•

Using FTP to Access the MIB Files

You can get each MIB file by using this procedure:
Make sure that your FTP client is in passive mode.
Step 1
Note
Use FTP to access the server ftp.cisco.com.
Step 2
Log in with the username anonymous.
Step 3
Enter your e-mail username when prompted for the password.
Step 4
At the
Step 5
Use the get MIB_filename command to obtain a copy of the MIB file.
Step 6
OL-23389-01
SNMP-MPD-MIB
SNMP-NOTIFICATION-MIB
SNMP-TARGET-MIB
SNMPv2-MIB
TCP-MIB
UDP-MIB
Some FTP clients do not support passive mode.
prompt, change directories to /pub/mibs/v1 and /pub/mibs/v2.
ftp>
Using FTP to Access the MIB Files
Catalyst 2928 Switch Software Configuration Guide
A-3