Monitoring And Maintaining Lldp And Lldp-Med - Cisco Catalyst 2928 Software Configuration Manual

Monitoring and Maintaining LLDP and LLDP-MED

Monitoring and Maintaining LLDP and LLDP-MED
To monitor and maintain LLDP and LLDP-MED on your device, perform one or more of these tasks,
beginning in privileged EXEC mode.
Command
clear lldp counters
clear lldp table
show lldp
show lldp entry entry-name
show lldp interface [interface-id]
show lldp neighbors [interface-id]
[detail]
show lldp traffic
show location
show network-policy profile
Catalyst 2928 Switch Software Configuration Guide
24-8
Description
Reset the traffic counters to zero.
Delete the LLDP table of information about neighbors.
Display global information, such as frequency of transmissions, the holdtime for
packets being sent, and the delay time for LLDP to initialize on an interface.
Display information about a specific neighbor.
You can enter an asterisk (*) to display all neighbors, or you can enter the name
of the neighbor about which you want information.
Display information about interfaces where LLDP is enabled.
You can limit the display to the interface about which you want information.
Display information about neighbors, including device type, interface type and
number, holdtime settings, capabilities, and port ID.
You can limit the display to neighbors of a specific interface or expand the display
to provide more detailed information.
Display LLDP counters, including the number of packets sent and received,
number of packets discarded, and number of unrecognized TLVs.
Display the location information for an endpoint.
Display the configured network-policy profiles.
Chapter 24 Configuring LLDP and LLDP-MED
OL-23389-01