Table of Contents
Advertisement
Chapter 30
Configuring Network Security with ACLs
Displaying IPv4 ACL Configuration
You can display the ACLs that are configured on the switch, and you can display the ACLs that have
been applied to VLANs.
When you use the ip access-group interface configuration command to apply ACLs, you can display the
access groups. You can use the privileged EXEC commands as described in
information.
Table 30-2
Commands for Displaying Access Lists and Access Groups
Command
show access-lists [number | name]
show ip access-lists [number | name]
show running-config [interface interface-id]
OL-23389-01
Purpose
Display the contents of one or all current IP and MAC address access lists
or a specific access list (numbered or named).
Display the contents of all current IP access lists or a specific IP access list
(numbered or named).
Displays the contents of the configuration file for the switch or the
specified interface, including all configured MAC and IP access lists and
which access groups are applied to an interface.
Catalyst 2928 Switch Software Configuration Guide
Displaying IPv4 ACL Configuration
Table 30-2
to display this
30-21
Advertisement
Table of Contents
Troubleshooting
