Displaying Available File Systems - Cisco Catalyst 2928 Software Configuration Manual

Working with the Flash File System

Displaying Available File Systems

To display the available file systems on your switch, use the show file systems privileged EXEC
command as shown in this example.
Switch# show file systems
File Systems:
*
Table B-1 show file systems Field Descriptions
Field Value
Size(b) Amount of memory in the file system in bytes.
Free(b) Amount of free memory in the file system in bytes.
Type Type of file system.
flash—The file system is for a flash memory device.
nvram—The file system is for a NVRAM device.
opaque—The file system is a locally generated pseudo file system (for example, the system) or a download
interface, such as brimux.
unknown—The file system is an unknown type.
Flags Permission for file system.
ro—read-only.
rw—read/write.\
wo—write-only.
Prefixes Alias for file system.
flash:—Flash file system.
nvram:—NVRAM.
null:—Null destination for copies. You can copy a remote file to null to find its size.
rcp:—Remote Copy Protocol (RCP) network server.
system:—Contains the system memory, including the running configuration.
tftp:—TFTP network server.
xmodem:—Obtain the file from a network machine by using the Xmodem protocol.
ymodem:—Obtain the file from a network machine by using the Ymodem protocol.
Catalyst 2928 Switch Software Configuration Guide
B-2
Appendix B
Size(b) Free(b)
15998976 5135872
- -
- -
524288 520138
- -
- -
- -
- -
- -
Working with the Cisco IOS File System, Configuration Files, and Software Images
Type Flags Prefixes
flash rw flash:
opaque rw bs:
opaque rw vb:
nvram rw nvram:
network rw tftp:
opaque rw null:
opaque rw system:
opaque ro xmodem:
opaque ro ymodem:
OL-23389-01