Cisco Catalyst 2928 Software Configuration Manual page 443

Chapter 21 Configuring IGMP Snooping
Use the privileged EXEC commands in
configuration:
Table 21-6 Commands for Displaying IGMP Filtering and Throttling Configuration
Command
show ip igmp profile [profile
number]
show running-config [interface
interface-id]
OL-23389-01
Table 21-6
Purpose
Displays the specified IGMP profile or all the IGMP profiles defined on the switch.
Displays the configuration of the specified interface or the configuration of all interfaces
on the switch, including (if configured) the maximum number of IGMP groups to which
an interface can belong and the IGMP profile applied to the interface.
Displaying IGMP Filtering and Throttling Configuration
to display IGMP filtering and throttling
Catalyst 2928 Switch Software Configuration Guide
21-21