Configuring Ieee 802.1X Authentication; Default Ieee 802.1X Authentication Configuration - Cisco Catalyst 2928 Software Configuration Manual

Chapter 9 Configuring IEEE 802.1x Port-Based Authentication

Configuring IEEE 802.1x Authentication

These sections contain this configuration information:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Default IEEE 802.1x Authentication Configuration

Table 9-2
Table 9-2
Feature
Switch IEEE 802.1x enable state
Per-port IEEE 802.1x enable state
AAA
RADIUS server
•
•
•
Host mode
Control direction
Periodic re-authentication
OL-23389-01
Default IEEE 802.1x Authentication Configuration, page 9-17
IEEE 802.1x Authentication Configuration Guidelines, page 9-19
Configuring IEEE 802.1x Authentication, page 9-17
Configuring the Switch-to-RADIUS-Server Communication, page 9-22
Configuring the Host Mode, page 9-23
Configuring Periodic Re-Authentication, page 9-24
Manually Re-Authenticating a Client Connected to a Port, page 9-24
Changing the Quiet Period, page 9-25
Changing the Switch-to-Client Retransmission Time, page 9-25
Setting the Switch-to-Client Frame-Retransmission Number, page 9-26
Setting the Re-Authentication Number, page 9-27
Configuring IEEE 802.1x Accounting, page 9-27
Configuring a Guest VLAN, page 9-28
Configuring a Restricted VLAN, page 9-29
Configuring MAC Authentication Bypass, page 9-31
Disabling IEEE 802.1x Authentication on the Port, page 9-31
Resetting the IEEE 802.1x Authentication Configuration to the Default Values, page 9-32
shows the default IEEE 802.1x authentication configuration.
Default IEEE 802.1x Authentication Configuration
IP address
UDP authentication port
Key
(required)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
Default Setting
Disabled.
Disabled (force-authorized).
The port sends and receives normal traffic without
IEEE 802.1x-based authentication of the client.
Disabled.
None specified.
•
1812.
•
None specified.
•
Single-host mode.
Bidirectional control.
Disabled.
Catalyst 2928 Switch Software Configuration Guide
Configuring IEEE 802.1x Authentication
(required)
(optional)
(optional)
(optional)
9-17