Using Ftp To Access The Mib Files - Cisco WS-C2960-24LC-S Software Configuration Manual

Appendix A Supported MIBs
•
•
You can also use this URL for a list of supported MIBs for the Catalyst 2960 switch:
Note
ftp://ftp.cisco.com/pub/mibs/supportlists/cat2960/cat2960-supportlist.htmlYou can access other
information about MIBs and Cisco products on the Cisco web site:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

Using FTP to Access the MIB Files

You can get each MIB file by using this procedure:
Make sure that your FTP client is in passive mode.
Step 1
Note
Use FTP to access the server ftp.cisco.com.
Step 2
Step 3 Log in with the username anonymous.
Step 4 Enter your e-mail username when prompted for the password.
Step 5 At the
Use the get MIB_filename command to obtain a copy of the MIB file.
Step 6
OL-8603-04
TCP-MIB
UDP-MIB
Some FTP clients do not support passive mode.
prompt, change directories to /pub/mibs/v1 and /pub/mibs/v2.
ftp>
Using FTP to Access the MIB Files
Catalyst 2960 Switch Software Configuration Guide
A-3