Displaying Standard Qos Information - Cisco Catalyst 2928 Software Configuration Manual

Chapter 31 Configuring QoS

Displaying Standard QoS Information

To display standard QoS information, use one or more of the privileged EXEC commands in
Table 31-6 Commands for Displaying Standard QoS Information
Command
show mls qos
show mls qos maps [cos-input-q | cos-output-q]
show mls qos vlan vlan-id
show running-config | include rewrite
OL-23389-01
Purpose
Display global QoS configuration information.
Display QoS mapping information.
Display the policy maps attached to the specified SVI.
Display the CoS transparency setting.
Catalyst 2928 Switch Software Configuration Guide
Displaying Standard QoS Information
Table
31-17
31-6: