Table of Contents
Advertisement
6300 Rev H User's Manual
In this screen, the Upper section has a new symbol (with Up & Down arrows) to the right of the Static
Target value field. This indicates that the Static Target value can be jogged up or down repeatedly, in
steps of 1 foot, using the Arrow keys, until
pressed, the Static Target value was incremented to 1 foot. Press
will change to 2. Press
Down-Arrow
Note: It is not possible to Jog a Target value if it is blinking.
The incremental value for the Jog feature varies depending on Static units and is shown in the table
below.
3.5
CHANGING RATE TARGET VALUES
Note: Rate-Target values are maintained through a power OFF/ON cycle.
125-9106A
Figure 3.10 : Jog the Static Target value
CANC
is pressed. In this case, since the
two times and the value decrements to 0.
Static units
Jog increment
Feet
1
Meters
1.0
inHg
0.001
mbar
0.01
psi
0.001
mmHg
0.01
kpa
0.001
Up-Arrow
Up-Arrow
one more time and the value
key was
Page 27
Advertisement
Table of Contents
