Laversab 6300 User Manual page 31

6300 Rev H User's Manual
In this screen, the Upper section has a new symbol (with Up & Down arrows) to the right of the Static
Rate Target value field. This indicates that the Static Rate Target value can be jogged up or down
repeatedly, in steps of 10 Feet/min, using the Arrow keys, until
Up-Arrow key was pressed, the Static Rate Target value was incremented to 2010 Feet/min. Press
Arrow one more time and the value will change to 2020. Press
decrements to 2000.
Note: It is not possible to Jog a Rate Target value if it is blinking.
The incremental value for the Jog feature varies depending on Static units and is shown in the table
below.
125-9106A
Figure 3.14 : Jog the Static Rate Target value
Static-Rate
Jog increment
Units
Feet/min 10
Meters/sec 0.1
inHg/min 0.01
mbar/min 0.1
psi/min 0.01
mmHg/min 0.1
kpa/min 0.01
CANC is pressed. In this case, since the
Down-Arrow two times and the value
Up-
Page 31