Table of Contents
Advertisement
6300 Rev H User's Manual
This section includes the process for setting up a wireless Remote, such as an iPad, with the appropriate App
This section includes the process for setting
for use with the 6300. The wireless Remote will function only if the 6300 has been installed with the optional
for use with the 6300. The wireless Remote will function only if the 6300 has been installed with the optional
for use with the 6300. The wireless Remote will function only if the 6300 has been installed with the optional
wireless capability.
The wireless antenna is located on the Top Panel of the tester, as shown in Figure 2.1 on Page 9. Care must be
The wireless antenna is located on the Top Panel of the
taken not to obstruct or cover the antenna with metallic objects, since this will be detrimental to effective Wi-
taken not to obstruct or cover the antenna with metallic objects, since this will be detrimental to effective Wi
taken not to obstruct or cover the antenna with metallic objects, since this will be detrimental to effective Wi
Fi operation.
Note: The Wired-Remote must be connected to the tester and operational even when the
Remote must be connected to the tester and operational even when the iPad is being
Remote must be connected to the tester and operational even when the
used.
E.1
iPad COMPATIBILITY
The Laversab App is compatible with the following iPads configured with iOS 8.1 or higher:
App is compatible with the following iPads configured with iOS 8.1 or higher:
App is compatible with the following iPads configured with iOS 8.1 or higher:
iPad 2, iPad Mini, iPad Mini 2, iPad Mini 3, iPad Mini 4, iPad Air, iPad Air 2, iPad Pro.
E.2
DOWNLOADING THE APP
DOWNLOADING THE APP
The Laversab App must be downloaded from the Apple App Store. Although the App itself is provided at
The Laversab App must be downloaded from the Apple App Store. Although the App itself is provided at
The Laversab App must be downloaded from the Apple App Store. Although the App itself is provided at
no charge, a credit card is required to create an Apple Store account which enables you to access and
no charge, a credit card is required t
download the App.
Once you have access to the App Store, search for "Laversab" and the app should appear with the icon as
Once you have access to the App Store, search for "Laversab" and the app should appear
Once you have access to the App Store, search for "Laversab" and the app should appear
shown below. If more than one App is displayed, select the App labeled "CH
shown below. If more than one App is displayed, select the App labeled "CH-2 / vx.xx", where '
version number. If more than one version of the App is displayed, select the one with the latest version
version number. If more than one version of the App is displayed, select the one with the latest version
version number. If more than one version of the App is displayed, select the one with the latest version
number. Do not select the App labeled "CH
number. Do not select the App labeled "CH-3 / vx.xx", since this is intended for use only
tester.
E.3
NETWORK SELECTION
Once the App has been installed on your iPad, the following steps need to be performed to connect to the
Once the App has been installed on your iPad, the following steps need to be performed to c
Once the App has been installed on your iPad, the following steps need to be performed to c
tester through the App.
a.
Turn ON the tester and ensure that the Wired-Remote is displaying the Main Screen. The
Turn ON the tester and ensure that the Wired
internal wireless access-poi
b. On the iPad select the 'Settings' icon. Then select the Wi
On the iPad select the 'Settings' icon. Then select the Wi-Fi section. (See Figure E.1 below).
right side will show all the Wi-Fi networks available. One of the networks will be labeled "LAV
right side will show all the Wi
xxxxx", where 'xxxxx' is the serial number of the tester you want to connect to.
xxxxx", where 'xxxxx' is the seria
c.
Select the network with the correct label, ensuring that the serial number matches the serial
Select the network with the correct label, ensuring that the serial number matches the serial
Select the network with the correct label, ensuring that the serial number matches the serial
number of your tester. The serial number of the tester can be found on the label placed on the
number of your tester. The serial number of the tester can be found on the label placed on the
number of your tester. The serial number of the tester can be found on the label placed on the
inside of the lid of the tester's case, towards the bottom right corner.
d. Once the correct network has been selected, you may be asked for a password for this network.
Once the correct network has been selected, you may be asked for a password for this network.
Once the correct network has been selected, you may be asked for a password for this network.
The password is "lavus505" (the first letter is a non-capitalized L). Once the password has been
The password is "lavus505" (the first letter is a non
entered, the Settings column
125-9106A
APPENDIX E : WI-FI OPERATION
APPENDIX
, iPad Mini 3, iPad Mini 4, iPad Air, iPad Air 2, iPad Pro.
point will now be active.
Fi networks available. One of the networks will be labeled "LAV-
of the tester's case, towards the bottom right corner.
column will show the selected network (LAV-xxxxx) in the Wi
tester, as shown in Figure 2.1 on Page 9. Care must be
nt which enables you to access and
2 / vx.xx", where 'x.xx' is the
Remote is displaying the Main Screen. The
of the tester you want to connect to.
capitalized L). Once the password has been
with the appropriate App
only with a 3-Output
(See Figure E.1 below). The
in the Wi-Fi section.
Page 84
Advertisement
Table of Contents
