Terminating The Connection With The Sftp Server; Configuring The Device As An Scp Client - HP VSR1000 Security Configuration Manual

Task
Display the help information of an
SFTP client command.

Terminating the connection with the SFTP server

Task
Terminate the connection with the
SFTP server and return to user view.

Configuring the device as an SCP client

This section describes how to configure the device as an SCP client to establish a connection with an SCP
server and transfer files with the server.
When you try to access an SCP server, the device must use the server's host public key to authenticate the
server. If the server's host public key is not configured on the device, the device will prompt you to confirm
whether to continue with the access.
If you choose to continue, the device accesses the server and downloads the server's host public
•
key.
• If you choose to not continue, the connection cannot be established.
In an insecure network, HP recommends that you configure the server's host public key on the device.
To transfer files with an SCP server:
Command
•
help
•
?
Command
•
bye
•
exit
•
quit
259
Remarks
Use either command.
Available in SFTP client view.
These two commands function in
the same way.
Remarks
Use one of the commands.
Available in SFTP client view.
These three commands function in the
same way.