External Acknowledgments; External Acknowledge Via Powerport-E - Eaton EMR-5000 Installation, Operation And Maintenance Manual

External Acknowledgments

Within the [Ex Acknowledge] menu, the User can assign a signal (e.g.: the state of a digital input) from the assignment
list that:
Acknowledges all (acknowledgeable) LEDs at once;
•
Acknowledges all (acknowledgeable) Output Relays at once; or
•
Acknowledges all (acknowledgeable) SCADA signals at once.
•
Ack LED
1..n, Assignment List
Ack RO
1..n, Assignment List
Ack Comm
1..n, Assignment List
Within the [Protection Para\Global Prot Para\TripControl] menu, the User can assign a signal that acknowledges a
pending trip command.
For details, please refer to the Trip Control section .

External Acknowledge Via PowerPort-E

If PowerPort-E is not running, please start the application.
•
If device data have not been downloaded recently, select »Receive Data From The Device« from the »Device« menu.
•
Double click on the »Device Parameter« icon in the navigation tree.
•
Double click on the »Ex Acknowledge« icon within the operation menu.
•
In the working window, the User can now assign each signal that resets all acknowledgeable LEDs, a signal that
•
resets all Relay Outputs, a signal that resets the SCADA signals respectively, and a signal that acknowledges a
pending trip command.
EMR-5000
www.eaton.com
IM02602012E
Ex Acknowledge.Ack LED
Ex Acknowledge.Ack RO
Ex Acknowledge.Ack Comm
238