Sntp - Eaton EMR-5000 Installation, Operation And Maintenance Manual

SNTP

SNTP
Principle – General Use
SNTP is a standard protocol for time synchronization via a network. At minimum, one SNTP server has to be integrated
into the network. The device can be configured for one or two connected SNTP servers.
The device's system time will be synchronized by the connected SNTP server 1 to 4 times per minute. In turn, the
SNTP server synchronizes its time via NTP with other NTP servers. This is the normal case. Alternatively it can receive
its time via GPS, radio controlled clock, or the like.
If the server's "Stratum" has been set manually, it is not an indication of its quality or reliability.
NTP-Server
(option)
Important pre-condition: The device needs to have access to an SNTP server
via the connected network. This server preferably should be installed locally.
GPS Satellite Signal (optional )
TCP/IP
NTP-Protocol
EMR-5000
GPS Connection (optional )
SNTP-Server
SNTP-Protocol
www.eaton.com
TCP/IP
Protective Relay
IM02602012E
299