Xerox 1186 User Manual page 80

SYSTEM TOOLS
70
command brings up its own window, explained
below.
Source Volume:
Enter the name of the logical volume that is
the sou rce of the VM EM yo u wa nt to copy.
Oest. Volume:
Enter the name of the logical volume to which
you are copying the VMEM.
Source Volume Password:
Oest. Volume Password:
If either the source or the destination volumes
are password-protected, the appropriate
passwords must be entered in these parameter
fields.
Start!
Starts copying the virtual memory. After
selecting Start! a mouse icon will appear.
Press the left mouse button to confirm the
copy operation and the right button to abort
the command. When the virtual memory has
been copied, you can respond affirmatively to
the confirmation message and boot the
Destination volume, or you can cancel the
boot and Quit!.
Quit!
Removes the CopyVMem window.
Scavenge!
Scavenge performs a logical volume-scavenge on
the volume named in the parameter item Volume
Menu:. This command should be used whenever
you suspect the integrity of your disk volume. This
command is part of the local file system's error
recovery process. For complete details see the disk
scavenging section in chapter 4, Software
XEROX 1186 USER'S GUIDE