Xerox 1186 User Manual page 133

APPENDIX C
example, to load the module KEYBOARDEDITOR,
you could do the following:
Insert Library Floppy #2
(FILESLOAD ICONW)
Insert Library Floppy #11
(FILESLOAD VIRTUALKEYBOARDS)
Insert Library Floppy #12
(FILESLOAD KEYBOARDEDITOR)
FILESLOAD takes an arbitrary number'of arguments,
You can also tell if a file is loaded by looking at its
property list with the PL command. Loaded files
have a property FILEDATES indicating its source. For
example typing:
Pl ICONW
will cause the following to be displayed in the
executive window
FILEDATES: (("11-Sep-85 11 :00:04" .
{ERIS}< LlSPCORE >LlBRARY > ICONW.;9»
COPYRIGHT: ("Xerox Corporation" 19841985)
Note: Sometimes when you are loading files or
showing directories, the executive window will
invert (turn black). In order to continue you must
press <RETURN>.
Loading the TEDIT Library Module
C-3
In order to smoothly load TEdit you must take some
preparatory steps before attempting to load all of
the files that comprise it. You should note that
these instructions are specifically formulated for
users without fileservers and assume that the local
disk is being used to store fonts and files.
XEROX 1186 USER'S GUIDE