Xerox 1186 User Manual page 61

SOFTWARE INSTALLATION
of a Lisp directory is to use the System Tool to Erase
the entire logical volume.
To find out if a particular logical volume already has
a Lisp directory on it, call
(lISPDIRECTORYP
VOLUMENAME)
[Function1
To find out what logical volumes you have on your
local disk, call
(VOLUMES) [Function1
To find out the total size of a logical volume in disk
pages, call
(VOLUMESIZE
VOLUMENAME)
[Function]
To find out the number of
free
pages left on a
volume, call
(DISKFREEPAGES
VOLUMENAME
RECOMPUTE)
[Function] .
And to find out which logical volume contains the
virtual memory you are currently running in, caU
(DISKPARTITION)
[Function1
There is a display window that can keep track of the
information provided by L1SPDIRECTORYP,
VOLUMES, VOLUMESIZE, and DISKFREEPAGES. The
display window can be in one of three states: ON,
OFF, or CLOSED. ON means the display window is
updated whenever the file system state changes.
(This continuous updating can slow down the file
. system significantly.) OFF means that the display
window is open, but updated only when you
left-button it with the mouse. CLOSED means that
the display window is closed and never updated.
The display mode is initially set to CLOSED. To
change the state of the display, call
(DSKDISPLAY
NEWSTATE) [Function1
XEROX
1186
USER'S GUIDE
51