Xerox 1186 User Manual page 135

APPENDIXC
6. After the directory has been displayed, type in
the executive window:
(COPYFILE '{FLOPPY}TEDITPAGE.DCOM
'{DSK}<LISPFILES)TEDITPAGE.DCOM)
8. After the copy process is complete, type in the
executive window:
{COPYFILE '{FLOPPY}TEDITFILE.DCOM
'{DSK}<LISPFILES)TEDITFILE.DCOM)
9. After the copy process is complete and with
Library Floppy #2 still in the floppy drive, type
in the executive window:
(FILESLOAD TEDITABBREV IMAGEOBJ
ICONW TEDITFIND TEDITFNKEYS)
10. Insert Library Floppy #1. In the executive
window type:
(DIR {FLOPPY})
11. After the directory has been displayed, type in
the executive window:
(FILESLOAD TEDIT)
This last procedure takes about four minutes and
completes the loading sequence for TEd it.
Loading the GRAPHER Library Module
Successful loading of the Grapher module requires
that all of the Helvetica display fonts be accessible
during the load. You must copy the Helvetica
display fonts to an accessible place, for example,
your local disk.
The easiest way to transfer the fonts from floppy to
a local disk is to use the library module Copyfiles.
You will find COPYFILES.DCOM on Library floppy #
4.
XEROX 1186 USER'S GUIDE
C-4.1