Xerox 1186 User Manual page 46

SOFTWARE INSTALLATION
3) Installing the Lisp Sysout from Floppies
Prerequisites:
Usage:
Assumes the Initial Microcode and Lisp Microcode
have been installed and the System Tools are
running (Procedure 2, above).
This procedure takes about 30 minutes.
Warning:
Destroys the Lisp Virtual Memory of last logout, but
not the LispFiles.
Steps for Installing the Lisp Sysout from Floppies
38
You should be in the base state, with the bouncing white
box on your screen.
a. Press the left mouse button to enter the window
labeled Lisp System TooL
• Wait about one minute for the Lisp System Tool
window to appear.
b. One third of the way down the window on the
line that begins with the Document: parameter,
move the cursor over the Floppy choice. Press the
left mouse button. Floppy should become
highlighted.
c.
Skip the next line and move the cursor over the
Volume Menu: parameter and press the left mouse
button. Type just the number 2, which will be
added to the word Lisp. After you finish typing, the
Volume Menu: parameter should look like:
Volume Menu: Lisp2.
XEROX 1186 USER'S GUIDE, July 1986