Xerox 1186 User Manual page 57

SOFTWARE INSTALLATION UPDATE
Steps for Microcode Only Installation
If you accidentally erase your Lispfiles volume, you
must reinstall your microcode. This step tells you
howtodo so.
a. Insert the Installation Utility floppy.
b. Press the B Reset button on the front of the
processor unit .
• Wait up to five seconds for the boot device icons
to appear on the screen.
• Press the F2 key (Floppy Boot).
The 4-digit cursor code will count 149, 199, 910, 920,
940,990, then the Main Menu will appear.
c. Type the number for Lisp Installation and press
<RETURN>.
d. Type the number for Install Lisp Microcode Only
and press
<
RETU RN > . You wi II be prom pted to
insert "System Files Floppy #1." Insert the floppy
and press
<
RETU RN
> .
Note: Prolog users must choose the menu option
"Install Prolog Microcode" after installing
the Lisp microcode.
XEROX 1186 USER'S GUIDE, December 1986
48-1