Xerox 1186 User Manual page 53

SOFTWARE INSTALLATION
Special Instructions :
If you already have the Lisp window display on your
screen, go to step
c.
Steps for Initializing lisp
a. Press the B Reset button on the front panel of the
processor unit.
Wait for the boot device icons to appear.
b. Press the F 1 key (Rigid Disk Boot)
The 4-digit cursor code will count 149, 199, 2000 ..
. 2600, 1186 ... in 1 - 2 minutes.
The InterLisp - D windows will appear on the screen.
c .• Answer the next prompt by furnishing your init
file designation. For example:
{taurus:aissouth}<softwaretest>pasa> init.lisp
An Init file contains information that configures
Interlisp-D for your installation.
If, for example, you are not connected to a network
with a file server, use the file INIT.NONET. To use
Init.nonet put the Lisp Library floppy containing
INIT.NONET (see -Appendix C, Library Guide; Lisp
Library Packages Index, for the number of the
Library floppy with Init.nonet) into the floppy drive
and type
{FLOPPY}INIT.NONET
in response to the prompt for an Init file. If you
prefer not to specify an Init file, press carriage
return.
XEROX 1186 USER'S GUIDE
45