Xerox 1186 User Manual page 134

APPENDIX C
1.
Copy the MODERN
1
O-CO.DISPLA YFONT from
Displayfont floppy
#
14
to your local disk
Insert display font floppy
#
14
into the floppy
drive and type into the executive window:
(OIR {FLOPPY}}
2, After the directory appears, type:
(COPYFILE
'{FLOPPY}MOOERN10-CO.OISPLAYFONT
'{OSK}<LISPFILES>
MOOERN10-CO.OISPLAYFONT)
3. When the copying process is complete you must
set the variable DISPLA YFONTDIRECTORIES so
files that require this font to load successfully
will know where to find it. In the executive
wi nd ow type:
(SETQ OISPLAYFONTDIRECTORIES
'({OSK}<LISPFILES»)
4. You also need to set the DIRECTORIES variable
to a list of places that a file will look for allied
files that it needs for a successful load. In the
executive window type:
(SETQ DIRECTORIES '({FLOPPY}
{DSK}<LISPFILES»)
Now you must copy some TEdit files from floppy to
your local disk. Having these files on the disk when
you load TEdit will prevent the loading process
from being interrupted when other TEdit files "look
for" these files. To ccipythese files to your disk:
5. Insert Library floppy #2 and in the executive
wi nd ow type:
(DIR {FLOPPY})
XEROX
1186
USER'S GUIDE
C-4