Sdlt Bar Code Labels; Media Label Identifiers - HP StorageWorks ESL E-Series Installation Manual

SDLT bar code labels

SDLT cartridges have a front slide slot located on the face of the cartridge next to the write-protect
switch (see Figure
CAUTION: Do not apply labels onto the top, bottom, sides, or back of the cartridge as this may
cause damage to the tape drive, or interfere with reliable operation.
Figure 50 Inserting an SDLT bar code label

Media label identifiers

Be sure to use the proper bar code labels for your drive technology.
found at the end of 7- or 8-character SDLT and Ultrium bar code labels.
Table 4

Media label identifiers

Cartridge type
SDLT
SDLT
SDLT 600
Ultrium 230
Ultrium 460
Ultrium 960
60 Loading tape cartridges
50). Use this slot for inserting the bar code label by sliding it into the slot.
Density
110/220 GB
160/320 GB
300/600 GB
100/200 GB
200/400 GB
400/800 GB
Table 4 lists the identifier that is
Label identifier
S or S1
S or S2
2
L1
L2
L3