Attaching The Tie Wraps - HP StorageWorks ESL E-Series Installation Manual

5. The e2400-160 interface controller ships with several sets of tie wraps. Each color set should be
used to designate a different drive cluster (see
1 Color tie wrap
White tie wrap
2
Figure 35

Attaching the tie wraps

NOTE: Ensure that different colors of tie wraps are used for each drive cluster and e2400-160
interface controller combination. If you have multiple sets of the same color, do not use them within
the same library. Colors help identify which SCSI cables are associated with which cluster.
a. Take one colored tie wrap and use it to group the cluster's SCSI cables together on the SCSI
port end of the tape drives. Attach it between the cluster cable clamp and the SCSI ports.
b. Take the second tie wrap of the same color and use it to group the cluster's SCSI cables
together nearest to the SCSI port end of the e2400-160 interface controllers. Attach it
between the cluster cable restraint bracket and the SCSI ports.
c. Take one white tie wrap and use it to group the cluster's SCSI cables together near the cable
access holes in the sheet metal on the right of the library cabinet.
NOTE: The other white tie wraps are provided as spares.
Figure 35).
3 Matching color tie wrap
ESL E-Series Tape Library unpacking and installation guide
1
2
3
47