Inserting The Fc Cable In The Drive Cable Clip - HP StorageWorks ESL E-Series Installation Manual

10.For each drive, attach the FC cables to port A only.
Use the cable appropriately labeled as A, B, C, or D for the corresponding drive.
11.Insert the FC cable into the cable clip for the drive (see
1 FC port A
Figure 41

Inserting the FC cable in the drive cable clip

CAUTION: To avoid damaging the FC cable, do not pinch or sharply bend the cable. Allow a
radial bend when attaching the FC cable to the cable clip.
12.Gather the FC cables for all drives near the drive handle on the lower right drive in the cluster,
and attach the cables to the drive handle using the tie wrap provided.
This will help keep the FC cables clear of the drive cluster below.
Figure
FC Port A
FC Port B
2 FC port B
ESL E-Series Tape Library unpacking and installation guide
41).
51