Menu Screen - HP StorageWorks ESL E-Series Installation Manual

2. Take the library off-line, if it is not off-line already.
a. Press the Ops button on the OCP to access the Operations screen.
b. Select Cabinet.
c. Use the Up and Down arrows to take the library off-line.
3. When the library completes the boot up sequence and the OCP is active, press Menu from the
Home screen.
The OCP displays the Menu screen (see
Figure 59

Menu screen

4. From the Menu screen, use the Up and Down arrows to highlight Setup and press Select.
5. The library prompts you for a password. Enter the 6 digit password.
NOTE: The default password is 001122.
74 Configuring the library
Figure 59).