Moving the library to the installation site
1.
Map a route to the installation site.
2.
Carefully roll the library down the ramp and guide it to the installation site (see
WARNING!
depending on their configuration. At least two people should move and install the library.
CAUTION:
Be aware that the laptop tray may open up during this process. If so, return it to the
closed position before continuing.
Figure 12
Rolling the library down the ramp
Setting up the library
1.
Stabilize the library by lowering the leveling feet:
a. Rotate each foot of the library until it makes contact with the floor.
b. Rotate each foot an additional 1/4 turn to begin raising the library.
c. Level the library using a carpenter's level.
24
Unpacking the library
Libraries weigh between 1,135 pounds (515 kg) and 1,459 pounds (662 kg),
Figure
12).