3.5 Status Model
Input
3.5.8 Overload Status Enable (OLSE)
SIM983 Scaling Amplifier
Input : Input overload. Indicates that V
tion 1.2.4.1).
O set : Intermediate stage overload. Indicates that V
Output : Output overload. Indicates that V
Reading this register (with the OLSR? query) clears all overload bits
that are set. If the overload condition persists, the bits will remain
cleared until the overload condition ceases and reoccurs. Use OVLD?
to query the current state of the overload.
The OLSE acts as a bitwise AND with the OLSR register to produce
the single-bit OLSB message in the Status Byte Register (SB). The
register can be set and queried with the OLSE(?) command.
At power-on, this register is cleared.
3 – 23
10 0 V (see also Sec-
in
V
10 0 V
in
ofs
10 0 V
out